|
|
| ECL/PECL TERMINATORS |
 |
Signals from ECL and PECL logic ICs are specified to be terminated into 50 Ω returned to VTT = -2.0V and VTT=+1.3V respectively. Most test instrumentation, including sampling oscilloscopes, have input impedances of 50 Ω returned to ground. This has caused problems for measuring ECL or PECL signals. Our 5620-Series of ECL/PECL Terminators solves this problem. They are DC biased 50 Ω attenuators that provide the proper 50 Ω termination impedance returned to VTT, while at the same time delivering an attenuated and level shifted output signal to 50 Ω ground based instrumentation. The output levels are safe to apply directly to sampling oscilloscopes and they are ideal for testing up to 4 Gb/s ECL/PECL logic.
| | 
5620 ECL Terminator
|
|
Specifications.
|
| Model | Logic Type | VTT | Bandwidth | Attenuation | RF Connectors | Spec
Sheet | | 5620 | ECL | -2.0 V | DC to 10 GHz | 12 dB (4x) | SMA |
| | 5622 | PECL | +1.3 V | DC to 8 GHz | 14 dB (5x) | SMA |
| | 5623 | ECL or PECL | 0.82*VDC | DC to 8 GHz | 20 dB (10x) | SMA |
|
|
|
|
Specifications shown here are typical values. Please refer to the Product Specification Sheets for complete information.
|
|
|
|
|
